Product Description
Specifications
Manufacturer: AddOn
Manufacturer Part Number: ADD-LC-LC-125M5OM3
Manufacturer Website Address: http://www.addoncomputer.com
Brand Name: AddOn
Product Name: Fiber Optic Duplex Patch Network Cable
Marketing Information: This is a 125m laser optimized multi-mode fiber (LOMM) duplex LC/LC OM3 aqua patch cable that offers backward compatibility with existing 50/125 equipment, intended for use with 10Gb Ethernet applications. This OM3 fiber uses an 850nm vertical cavity surface emitting laser (VCSEL), and supports 2000MHz/km effective modal bandwidth (EMB) at 850nm. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits. They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties.
Product Type: Network Cable
Technical Information
Cable Type: Fiber Optic
Cable Characteristic: Patch Cable
Fiber Optic Mode: Multi-mode
Core/Cladding Diameter: 50/125 µm
Cable Length: 410.10 ft
Connector on First End: 2 x LC Male Network
Connector on Second End: 2 x LC Male Network
Features: Halogen Free
Device Supported:
Data Transfer Rate: 10 Gbit/s
Physical Characteristics
Color: Aqua
Manufacturer: AddOn
Manufacturer Part Number: ADD-LC-LC-125M5OM3
Manufacturer Website Address: http://www.addoncomputer.com
Brand Name: AddOn
Product Name: Fiber Optic Duplex Patch Network Cable
Marketing Information: This is a 125m laser optimized multi-mode fiber (LOMM) duplex LC/LC OM3 aqua patch cable that offers backward compatibility with existing 50/125 equipment, intended for use with 10Gb Ethernet applications. This OM3 fiber uses an 850nm vertical cavity surface emitting laser (VCSEL), and supports 2000MHz/km effective modal bandwidth (EMB) at 850nm. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits. They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties.
Product Type: Network Cable
Technical Information
Cable Type: Fiber Optic
Cable Characteristic: Patch Cable
Fiber Optic Mode: Multi-mode
Core/Cladding Diameter: 50/125 µm
Cable Length: 410.10 ft
Connector on First End: 2 x LC Male Network
Connector on Second End: 2 x LC Male Network
Features: Halogen Free
Device Supported:
- Patch Panel
- Hub
- Switch
- Media Converter
- Router
- Network Device
Data Transfer Rate: 10 Gbit/s
Physical Characteristics
Color: Aqua
Product Videos
Custom Field
Product Reviews
(No reviews yet)
Write a Review
Read Before Ordering
- Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
- In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
- The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
- Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
- Refurbished printers may not have full ink cartridges or laser toners.
- Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
- Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwarehub.ca or call 778-404-7011 before placing an order.
