The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Cisco Catalyst 3560V2-48PS - Switch - 48 Ports - Managed - Rack-mountable

BRAND: Cisco

CA$15,513.50

(You save CA$3,878.38) CA$19,391.88

(No reviews yet) Write a Review

Part Number #: WS-C3560V2-48PS-SM
Availability:: In Stock

Get Bulk Pricing

Don't like the price? Make an offer!

Overview
Reviews
Read Before Ordering

Product Description

Main Specifications:

Product Description	Cisco Catalyst 3560V2-48PS - switch - 48 ports - managed - rack-mountable
Packaged Quantity	3 (specifications are for single item)
Device Type	Switch - 48 ports - L3 - managed
Enclosure Type	Rack-mountable 1U
Subtype	Fast Ethernet
Ports	48 x 10/100 + 4 x SFP
Power Over Ethernet (PoE)	PoE
MAC Address Table Size	12K entries
Routing Protocol	RIP-1, RIP-2, static IP routing
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c
Features	Layer 3 switching, DHCP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, MAC address filtering, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Power	AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH)	17.4 in x 11.6 in x 1.7 in
Weight	11 lbs
Manufacturer Warranty	Limited lifetime warranty
General
Packaged Quantity	3 (specifications are for single item)
Device Type	Switch - 48 ports - L3 - managed
Enclosure Type	Rack-mountable - 1U
Subtype	Fast Ethernet
Ports	48 x 10/100 + 4 x SFP
Power Over Ethernet (PoE)	PoE
MAC Address Table Size	12K entries
Routing Protocol	RIP-1, RIP-2, static IP routing
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c
Authentication Method	Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features	Layer 3 switching, DHCP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, MAC address filtering, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Flash Memory	32 MB flash
Expansion / Connectivity
Interfaces	24 x 100Base-TX - RJ-45 - PoE ¦ 24 x 100Base-TX - RJ-45 ¦ 1 x console - RJ-45 - management ¦ 4 x SFP (mini-GBIC)
Power
Power Device	Internal power supply
Voltage Required	AC 120/230 V ( 50/60 Hz )
Features	Redundant Power System (RPS) connector
Miscellaneous
MTBF	206,041 hours
Compliant Standards	GOST, CISPR 24, NOM, EN55024, EN55022 Class A, CISPR 22, EMC, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15 A
Software / System Requirements
Software Included	Cisco IOS IP Base
Dimensions & Weight
Width	17.4 in
Depth	11.6 in
Height	1.7 in
Weight	11 lbs
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	113 °F
Humidity Range Operating	10 - 85%

Cisco Catalyst 3560 v2 Series Overview:

The Cisco Catalyst 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.

Cisco Catalyst 3560 v2 Series Highlights

Lower power consumption than its predecessors
Backward compatible - uses the same Cisco IOS Software image as the 3560 series and has the same feature set
Full EnergyWise support to monitor energy consumption of network infrastructure and implement energy saving programs to reduce energy costs
Compatible with Cisco Redundant Power System (RPS) 2300
All units have a uniform depth of 11.9 inches for better cable management
Preconfigurable with the Cisco IOS Software release at the time of ordering
IPv6 routing included in the IP Services feature set
DC powered stand-alone model

Cisco Catalyst 3560 v2 Series Software

The Cisco Catalyst 3560 v2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced QoS, rate limiting, ACLs, and basic static and Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast and IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which includes IPv6 routing and IPv6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license.

Configurable Cisco IOS Software

The Cisco Catalyst 3560 v2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time and cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version.

Cisco EnergyWise

The Cisco Catalyst 3560 v2 series support Cisco EnergyWise, which is a technology that enables monitoring, reporting, and management of energy consumption by end devices that are Cisco EnergyWise enabled. This technology enables companies to reduce their energy cost and carbon footprint. These are some of the EnergyWise features available:

Discover all Cisco EnergyWise enabled devices on the network.
Monitor and report power consumption by these devices.
Implement business rules to control power to these end devices.

Primary Features and Benefits

The Cisco Catalyst 3560 v2 series offers several ease of use features, which enable fast and easy configuration of advanced Cisco Catalyst capabilities. These features include:

Cisco SmartPorts simplify the configuration of advanced Cisco Catalyst capabilities, encapsulating years of Cisco networking expertise. Cisco SmartPort macros offer a set of verified, pretested, Cisco-recommended switch port configurations or templates per connection type that are easy to apply, enabling users to consistently and reliably configure essential security, IP Telephony, availability, QoS, and manageability features with minimal effort and expertise.
Cisco AutoSmartPorts automatically execute SmartPort macros based on the end device type, such as IP Phones, Desktop Computers, and WLAN Access Points.
Cisco Express Setup simplifies initial configuration with a Web browser, eliminating the need for more complex terminal emulation programs and CLI knowledge.
IEEE 802.3af and Cisco prestandard PoE support comes with automatic discovery to detect a Cisco prestandard or IEEE 802.3af endpoint and provide the necessary power without any user configuration.
DHCP autoconfiguration of multiple switches through a boot server eases switch deployment.
DHCP AutoInstall simplifies the deployment of a large number of switches by automatically downloading a specified Cisco IOS Software image and a configuration file from a TFTP server. This feature can be used to implement a "zero touch deployment".
DHCP Port Based Allocation allows you to allocate the same IP address for a specified port. The feature allows persistent allocation of IP addresses to specified network devices.
Embedded Event Manager (EEM) is a powerful and flexible tool for management and automation. This feature can be used to monitor network events and program automatic actions based on these network events. Policies can be defined via CLI or Tcl script and can be used in a variety of scenarios, such as automatically backing up a configuration file at a specified time or triggering an alert when traffic congestion crosses a specified threshold. EEM requires the IP Services license.
Configuration Replace and Rollback simplifies configuration management by allowing you to rollback configuration changes. This feature allows you to replace a configuration file with a saved configuration file without a switch reload, and up to 14 configuration files can be saved.
Automatic QoS (Auto QoS) simplifies QoS configuration in voice-over-IP (VoIP) networks by issuing interface and global switch commands to detect Cisco IP phones, classify traffic, and enable egress queue configuration.
Autosensing on each 10/100 port detects the speed of the attached device and automatically configures the port for 10- or 100-Mbps operation, easing switch deployment in mixed 10- and 100-Mbps environments.
Autonegotiating on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.
Dynamic Trunking Protocol (DTP) helps enable dynamic trunk configuration across all switch ports.
The default configuration stored in Flash memory helps ensure that the switch can be quickly connected to the network and can pass traffic with minimal user intervention.
Automatic medium-dependent interface crossover (Auto-MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed on a 10/100 port.
Time Domain Reflectometry (TDR) to diagnose and resolve cabling problems on copper Ethernet ports.

Enhanced Security

With the wide range of security features, such as ACLs, authentication, port-level security, and identity based network services (IBNS) with 802.1x and extensions, that the Cisco Catalyst 3560 v2 Series offers, businesses can protect important information, keep unauthorized people off the network, guard privacy, and maintain uninterrupted operation. These security features include:

IEEE 802.1x allows dynamic, port-based security, providing user authentication.
IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected.
IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port.
IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including those of the client.
IEEE 802.1x with an ACL assignment allows for specific identity-based security policies regardless of where the user is connected.
IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network access on the guest VLAN.
IEEE 802.1x Supplicant on the switches can be used to authenticate switches onto the network, thereby preventing unauthorized network devices from being used to expand the network.
IEEE 802.1x Readiness Check eases 802.1x deployment in an enterprise. This feature determines if the client has an 802.1x supplicant by initiating an 802.1x ping.
Open 802.1x allows network communication to take place before an 802.1x authentication. This feature is useful for PXE environments and other applications where network connectivity is required prior to 802.1x authentication. An ACL is used to allow traffic prior to authentication.
Flexible Authentication or FlexAuth can be used to determine the order of authentication methods on the network. For example, if the order is set to 802.1x, MAB, and WebAuth, the network will first try to authenticate via 802.1x, then via MAB, and then via WebAuth.
Multi Authentication or MultiAuth enables up to 8 users to authenticate via the same switch port. This feature includes support for multiple authentication methods, such as 802.1x, MAB, and WebAuth, and per-user ACLs.
Web authentication for non-802.1x clients allows non-802.1x clients to use an SSL-based browser for authentication.
Local Web Authentication is a key feature that allows non 802.1x users to authenticate via a login web page. The user enters the authentication info, such as user id and password, and gets authenticated via a AAA server.
Local Web Authentication Banner allows users to customize the authentication web page.
Multi-Domain Authentication allows an IP phone and a PC to authenticate on the same switch port while placing them on appropriate Voice and Data VLAN.
MAC Auth Bypass (MAB) for voice allows third-party IP phones without an 802.1x supplicant to get authenticated using their MAC address.
Cisco security VLAN ACLs (VACLs) on all VLANs prevent unauthorized data flows from being bridged within VLANs.
Multilevel security on console access prevents unauthorized users from altering the switch configuration.
The user-selectable address-learning mode simplifies configuration and enhances security.
BPDU Guard shuts down Spanning Tree Protocol PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops.
Spanning-Tree Root Guard (STRG) prevents edge devices not in the network administrator's control from becoming Spanning Tree Protocol root nodes.
IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits the number of concurrent multicast streams available per port.
Dynamic VLAN assignment is supported through implementation of VLAN Membership Policy Server (VMPS) client functions to provide flexibility in assigning ports to VLANs. Dynamic VLAN helps enable the fast assignment of IP addresses.
Cisco Network Assistant software security wizards ease the deployment of security features for restricting user access to a server as well as to a portion of or the entire network.
Two thousand access control entries (ACEs) are supported.

Availability and Scalability

The Cisco Catalyst 3560 v2 Series is equipped with a robust set of features that allow for network scalability and higher availability through IP routing as well as a complete suite of Spanning Tree Protocol enhancements aimed to maximize availability in a Layer 2 network. Enhancements to the standard Spanning Tree Protocol, such as Per-VLAN Spanning Tree Plus (PVST+), Uplink Fast, and PortFast, maximize network uptime. PVST+ allows for Layer 2 load sharing on redundant links to efficiently use the extra capacity inherent in a redundant design. Uplink Fast, PortFast, and BackboneFast all greatly reduce the standard 30- to 60-second Spanning Tree Protocol convergence time. Loop guard and bridge-protocol-data-unit (BPDU) guard provide Spanning Tree Protocol loop avoidance. Superior redundancy features include:

Cisco Uplink Fast and BackboneFast technologies help ensure quick failover recovery, enhancing overall network stability and reliability.
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) provides rapid spanning-tree convergence independent of spanning-tree timers and the benefit of distributed processing.
Per-VLAN Rapid Spanning Tree Plus (PVRST+) allows rapid spanning-tree reconvergence on a per-VLAN spanning-tree basis, without requiring the implementation of spanning-tree instances.
Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, fail-safe routing topologies.
FlexLink allows a fast failover for redundant links in a Layer 2 network. FlexLink offers a faster convergence than Spanning Tree Protocol and also eliminates the need for Spanning Tree Protocol.
FlexLink Load Balancing allows both the primary and the backup links to carry traffic for different sets of VLANs. If an interface goes down, the peer interface will carry all the traffic for all VLANs.
Command-switch redundancy enabled in Cisco Network Assistant software allows designation of a backup command switch that takes over cluster-management functions if the primary command switch fails.
Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links to be detected and disabled to avoid problems such as spanning-tree loops.
Switch port autorecovery (errdisable) automatically attempts to reenable a link that is disabled because of a network error.
Equal cost routing (ECR) provides load balancing and redundancy.
Bandwidth aggregation up to 8 Gbps through Cisco Gigabit EtherChannel technology and up to 800 Mbps through Cisco Fast EtherChannel technology enhances fault tolerance and offers higher-speed aggregated bandwidth between switches and to routers and individual servers.

High-Performance IP Routing

The Cisco Catalyst 3560 v2 series switches deliver high-performance, hardware-based IP routing. The Cisco Express Forwarding-based routing architecture allows for maximum scalability and performance. Implementing routed uplinks to the core improves network availability by enabling faster failover protection and simplifying the Spanning Tree Protocol algorithm by terminating all Spanning Tree Protocol instances at the aggregator switch. If one of the uplinks fails, quicker failover to the redundant uplink can be achieved with a scalable routing protocol such as Open Shortest Path First (OSPF) or Enhanced Interior Gateway Routing Protocol (EIGRP) rather than relying on standard Spanning Tree Protocol convergence. Redirection of a packet after a link failure using a routing protocol results in faster failover than a solution that uses Layer 2 spanning-tree enhancements. Additionally, routed uplinks allow better bandwidth use by implementing equal cost routing (ECR) on the uplinks to perform load balancing. Routed uplinks optimize the utility of uplinks out of the LAN Access by eliminating unnecessary broadcast data flows into the network backbone. Other high-performance routing features include:

Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing.
Basic IP unicast routing protocols (static, RIPv1, RIPv2, EIGRP-Stub) are supported for small-network routing applications.
IPv6 unicast routing capability (static, RIP, OSPF, and EIGRP protocols) forwards IPv6 traffic through configured interfaces (requires the IP Services license).
Policy-Based Routing (PBR) allows superior control by enabling flow redirection regardless of the routing protocol configured. The IP Services license is required.
Inter-VLAN IP routing provides for full Layer 3 routing between two or more VLANs.
Protocol Independent Multicast (PIM) for IP Multicast routing is supported, including PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode. The IP Services license is required.
Distance Vector Multicast Routing Protocol (DVMRP) tunneling interconnects two multicast-enabled networks across nonmulticast networks. The IP Services license is required.
Fallback bridging forwards non-IP traffic between two or more VLANs. The IP Services license is required.

Integrated Cisco IOS Software Features for Bandwidth Optimization

The Cisco Catalyst 3560 v2 series offers several advanced features for bandwidth optimization. These features include:

Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall systems performance.
IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and loop-free networks simplifies network configuration and improves fault tolerance.
PVST+ allows for Layer 2 load sharing on redundant links to efficiently use the extra capacity inherent in a redundant design.
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) allows a spanning-tree instance per VLAN, enabling Layer 2 load sharing on redundant links.
ECR provides load balancing and redundancy.
VPN routing/forwarding (VRF)-Lite enables a service provider to support two or more VPNs, with overlapping IP addresses.
VRF Aware IP Services enable the use of functions such as TFTP, FTP, SYSLOG, SNMP, traceroute, ping, HSRP, ARP, and IP SLAs within a VRF.
Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge to minimize broadcasts and maximize available bandwidth.
VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk link.
VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on VTP trunks by flooding broadcast traffic only on trunk links required to reach the destination devices.
Internet Group Management Protocol v3 (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2 Snooping provide fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.
IGMP filtering provides multicast authentication by filtering out nonsubscribers and limits the number of concurrent multicast streams available per port.
Multicast VLAN registration (MVR) continuously sends multicast streams in a multicast VLAN while isolating the streams from subscriber VLANs for bandwidth and security reasons.
Source Specific Multicast (SSM) simplifies multicast deployment and optimizes bandwidth for one-to-many applications, such as a corporate video broadcast.
Multicast VRF Lite enables Multicast Virtualization and separation of VRF traffic.

Advanced QoS

The Cisco Catalyst 3560 v2 series offers superior multilayer, granular QoS features to help ensure that network traffic is classified and prioritized, and that congestion is avoided in the best possible manner. Configuration of QoS is greatly simplified through automatic QoS (Auto QoS), a feature that detects Cisco IP phones and automatically configures the switch for the appropriate classification and egress queuing. Other QoS features include:

Standard 802.1p CoS and DSCP field classification are provided, using marking and reclassification on a per-packet basis by source and destination IP address, source and destination MAC address, or Layer 4 TCP or UDP port number.
Cisco control- and data-plane QoS ACLs on all ports help ensure proper marking on a per-packet basis.
Four egress queues per port enable differentiated management of up to four traffic types.
Shaped Round Robin (SRR) scheduling helps ensure differential prioritization of packet flows by intelligently servicing the ingress and egress queues.
Weighted tail drop (WTD) provides congestion avoidance at the ingress and egress queues before a disruption occurs.
Strict priority queuing guarantees that the highest-priority packets are serviced ahead of all other traffic.
There is no performance penalty for highly granular QoS functions.
IP SLAs allow you to optimize IP business applications for VOIP, Video, and Data by measuring end-to-end service level and performance metrics.
The Cisco Committed Information Rate (CIR) function guarantees bandwidth in increments as low as 8 kbps.
Up to 64 aggregate or individual policers are available per Fast Ethernet or Gigabit Ethernet port.

Intelligent Power over Ethernet (PoE) Management

The Cisco Catalyst 3560 v2 series PoE models support Cisco IP phones, Aironet WLAN access points, as well as any IEEE 802.3af compliant end device. These are some of the advanced PoE features available:

Cisco Discovery Protocol version 2 allows the Cisco Catalyst 3560 v2 Series Switch to negotiate a more granular power setting when connecting to a Cisco powered device, such as IP phones or access points, than what is provided by IEEE classification.
Per Port power consumption command allows customer to specify maximum power setting on an individual port.
Per Port PoE Power Sensing measures actual power being drawn, enabling more intelligent control of powered devices.
The PoE MIB provides proactive visibility into power usage and enables power policing and troubleshooting.
Link Layer Discovery Protocol (LLDP and LLDP-MED) adds support for IEEE 802.1AB link layer discovery protocol for interoperability in multivendor networks. Switches exchange speed, duplex, and power settings with end devices such as IP phones.

Management and Control Features

The Cisco Catalyst 3560 v2 series switches come with an extensive set of management and control features that include:

Cisco IOS Software CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches.
Cisco Discovery Protocol version 2 allows the Cisco Catalyst 3560 v2 Series Switch to negotiate a more granular power setting when connecting to a Cisco powered device, such as IP phones or access points, than what is provided by IEEE classification.
The PoE MIB provides proactive visibility into power usage and allows customers to set different power level thresholds.
Switching Database Manager templates for access, routing, and VLAN deployment scenarios allow the administrator to easily maximize memory allocation to the desired features based on deployment-specific requirements.
Generic On-Line Diagnostics (GOLD) check the health of hardware components and verifies proper operation of the system data and control plane at run time and boot time.
VLAN trunks can be created from any port, using either standards-based 802.1Q tagging or the Cisco Inter-Switch Link (ISL) VLAN architecture.
Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting.
Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches.
Cisco Group Management Protocol server functions help enable a switch to serve as the Cisco Group Management Protocol router for client switches. The IP Services license is required.
IGMPv3 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic to only the requestors.
Remote SPAN (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network.
Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet takes from source to destination.
All nine RMON groups are supported through a SPAN port, which permits traffic monitoring of a single port, a group of ports from a single network analyzer or RMON probe.
Domain Name System (DNS) provides IP address resolution with user-defined device names.
Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.
Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.
Multifunction LEDs per port for port status; half-duplex and full-duplex mode; and 10BASE-T, 100BASE-TX, and 1000BASE-T indication as well as switch-level status LEDs for system, redundant power supply, and bandwidth use provide a comprehensive and convenient visual management system.

Cisco Network Assistant

Cisco Network Assistant is a PC-based network-management application with a user-friendly GUI.

Cisco Network Assistant is a free, Windows-based application that simplifies the administration of networks of up to 250 users. It supports a wide range of Cisco Catalyst intelligent switches from Cisco Catalyst 2960 through Cisco Catalyst 4506. With Cisco Network Assistant, users can manage Cisco Catalyst switches plus launch the device managers of Cisco integrated services routers (ISRs) and Cisco Aironet WLAN access points.
The easy-to-use graphical interface provides both a topology map and front-panel view of the switch.
Cisco AVVID (Architecture for Voice, Video and Integrated Data) wizards need just a few user inputs to automatically configure the switch to optimally handle different types of traffic: voice, video, multicast, and high-priority data.
A security wizard is provided to restrict unauthorized access to applications, servers, and networks.
Upgrading the Cisco IOS Software on Cisco Catalyst switches is a simple matter of pointing and clicking, with one-click upgrades.
Cisco Network Assistant supports multilayer feature configurations such as routing protocols, ACLs, and QoS parameters.
Multidevice and multiport configuration capabilities allow administrators to save time by configuring features across multiple switches and ports simultaneously.
The user-personalized interface allows modification of polling intervals, table views, and other settings.

Product Videos

Custom Field

Product Reviews

(No reviews yet) Write a Review

Read Before Ordering

Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
Refurbished printers may not have full ink cartridges or laser toners.
Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwarehub.ca or call 778-404-7011 before placing an order.

View AllClose

Cisco Catalyst 3560V2-48PS - Switch - 48 Ports - Managed - Rack-mountable

BRAND: Cisco

Product Description

Main Specifications:

General

Expansion / Connectivity

Power

Miscellaneous

Software / System Requirements

Dimensions & Weight

Environmental Parameters

Product Videos

Custom Field

Product Reviews

Read Before Ordering

Recommended

Cisco Catalyst 3750-48PS - switch - 48 ports - managed - rack-mountable

Cisco Catalyst 3750G-48PS-S Switch 48 Ports Managed Rack Mountable

Cisco Catalyst 3750X-48P-S Switch 48 Ports Managed Rack Mountable

Cisco Catalyst 3750V2-48PS E Switch 48 Ports Managed Rack Mountable